Affordable, High-Quality IP Telephony

The huge, high-resolution, full-color liquid crystal display on this six-line telephone offers top- of-the-line IP telephony performance. Part of Cisco Small Business IP Phone Series, the SPA962 allows business users to configure each of its lines for unique phone numbers or extensions, or assign them a shared number to be used by multiple phones.

The Power over Ethernet feature enables the SPA962 to power up without need of an additional electrical source.

Additional features of the Linksys by Cisco SPA962 IP Phone include:

• Dual-switched Ethernet ports, speakerphone, caller ID, call hold and conferencing
• Speakerphone and 2.5 mm headset port
• Power over Ethernet 802.3af, allowing for single-source electricity without an additional power supply
• The ability to connect directly to an Internet telephone service provider, an IP PBX, or a large-scale IP Centrex deployment
• Easy station moves, presence, and shared line appearances across local and geographically dispersed locations

Stand-alone or Connected to a PBX

Two active lines (plus 2 additional lines via firmware upgrade) and dual switched Ethernet ports offer incredible flexibility to the home or small-business Internet telephony user. Part of Cisco Small Business IP Phone Series, the SPA942 IP Phone can be configured to carry a unique phone number or extension for each of its lines, or can be configured to use a shared number over multiple phones.

Based on the SIP standard, the SPA942 is able to easily integrate new features and services offered by providers. A high-resolution display makes for easy menu- and web-based configuration.

Additional features of the Linksys by Cisco SPA942 IP Phone include:

• Power over Ethernet, allowing for single-source electricity without an additional power supply
• A high-resolution graphical display; dual switched Ethernet ports; high-quality, full-duplex speakerphone; and a 2.5 mm headset port
• The ability to connect directly to an Internet telephone service provider or to an IP PBX
• Easy station moves, presence, and shared line appearances across local and geographically dispersed locations 

IP Voice calls over your Wi-Fi network

The Cisco WIP310 Wireless-G IP Phone (Figure 1) enables high-quality voice over IP (VoIP) service through a Wireless-G network.

The Cisco WIP310 operates in the 2.4-GHz band and supports 802.11b/g and the latest VoIP Session Initiation Protocol (SIP). The large, full-color high-resolution display features an intuitive user interface that enables users to easily and quickly configure the handset with network access using Wi-Fi Protected Setup (WPS).

Averages about 3 hours talk time, 40 hours standby time (home)**
Easy configuration via web interface or provisioning server
Backlit keypad and display
Multiprofile Wi-Fi support
Visual voicemail indicator
Network Address Translation (NAT) pass-through/serial tunnel (STUN) support
USB charger interface
Polyphonic ring tone
User-downloadable ring tones
Speakerphone
 

Make IP Voice Calls with Your Existing Analog Phone

The incredible cost savings of Internet telephone service isn't limited only to those with IP phones. Part of Cisco Small Business Voice Gateways and ATAs, the PAP2T offers the benefits of high-quality voice over IP (VoIP) without the need to upgrade your existing analog phones.

The PAP2T features two standard analog, fax-friendly telephone ports which operate as separate lines, complete with individual phone numbers.

Additional features of the Cisco PAP2T Internet Phone Adapter include:

• High-quality, feature-rich telephone service over your broadband Internet connection
• Two standard telephone ports for analog phones or fax machines that serve as separate lines, complete with unique phone numbers
• Up to 256-bit AES encryption for data transmissions and password-protected administrative options
• Compatibility with all common telephone features such as caller ID, call waiting and voicemail

Connect up to eight analog devices to your IP network

The Cisco SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multiport RJ-21 50-pin connector, offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100BASE-T RJ-45 Ethernet interface to connect to either a router or a multilayer switch.

Solid in design, the Cisco SPA8000 is an affordable solution that is ideally suited for use in business and consumer voice over IP (VoIP) service offerings, including call centers and multidwelling environments. Customers can protect and extend their investment by continuing to use their existing analog telephones and teleconferencing equipment.

• Eight voice ports (RJ11) for analog phones or fax machines
• Impedance agnostics: eight configurable settings
• Call waiting, cancel call waiting, call waiting caller ID
• Caller ID with name and number (multinational variants)
• Call forwarding: no answer, busy, all
• Three-way conference calling with local mixing
• Touch-tone phone keypad configuration with interactive voice response (IVR)

The Home Office, Small Office Phone System

The SPA9000 marries the rich feature set of high-end PBX telephone systems with the convenience and cost advantages of Voice over IP. It has common voice system features such as an auto-attendant, shared line appearances, three way call conferencing, intercom, music on hold, call-forwarding and much more. The SPA9000 opens up access to the benefits of VoIP, including low cost long distance service, telephone number portability, and one network for both voice and data.

The SPA9000 is so easy to configure that a fully working system can be set up in minutes. New telephones are automatically detected and registered when they are connected to the SPA9000. The SPA9000 has an integrated web server that allow features to be configured using a web browser. The web server has multiple levels of password protected access to user and service level features. Service level settings may be locked by the Internet Telephone Service Provider to ensure they are not inadvertently corrupted. The Internet Telephone Service Provider also can remotely update the software and settings through a secure encrypted connection.

With its integrated router, the SPA9000 can be either connected directly to the internet connection or to another router on your network. The SPA9000 has separate WAN and LAN Ethernet ports. The WAN connection can be connect through DHCP or a fixed IP address. The LAN port can assign IP addresses to IP Phones and computers using NAT and DHCP.

Connect Your 4 Existing Analague Phones

Connect up to four standard analog telephone lines to a voice over IP (VoIP) network, with calls automatically routed to and from your existing telephone service. Part of Cisco Small Business Voice Systems, the SPA400 Internet Telephony Gateway was designed to be deployed with the Cisco SPA9000 IP telephony system.

The SPA400 also supports up to 32 voicemail accounts with customized greetings that can be accessed through a user's Cisco IP phone.

Additional features of the Linksys by Cisco SPA400 include:

• Support for four RJ-11 FXO ports to connect to the public switched telephone network (PSTN)
• One 10/100 BaseT RJ-45 Ethernet interface used to connect to the local IP network
• Integrated voicemail server application supporting 32 voicemail accounts
• Easy installation support using the SPA9000 Setup Wizard

Managed Power Over Ethernet Switches

The Linksys WebView Managed switch allows you to expand your network securely. Configuration of the switch is secured using SSL for Web access. User control is secured using 802.1x security using a RADIUS authentication mechanism and can also be controlled using MAC filtering.

Additional features of the Linksys by Cisco Power Over Ethernet switches include:

• Optimized for maximizing system availability with fully redundant
• port authentication, Access Control Lists (ACL), DOS Prevention, and MAC-based
• The enhanced QoS and traffic management features ensure clear and reliable IP voice and video communications
• Automatic load sensing, the power control circuitry automatically detects PoE on the end-device before providing power
• For safety, each port has independent overload and short-circuit protection, along with LED indicators for power status